Showing all 11 results

Add to cart

Cage Mount Adaptor

$18.00

The Cage Mount Adaptor is a simple way to provide a mounting solution for all types of cages to fork legs, down tubes etc. Sure, they’ve been done before, but what is different about this ours is the V section underside which provides two lines of contact and so greater mounting stability.

The Cage Mount Adaptor uses the same robust additive manufacturing process that is used for our Cranktank4 Caps, Tube Keepers and Wedgie. In fact, two prototypes have travelled both the GDMBR and the Tour Aotearoa.

We prefer utilising stainless hose clamps to secure these to the bike but, equally, the old simple method of cable ties and self adhesive tape will do the job too.

It includes:

1 Cage Mount Adaptor
3 x 5 mm x 16 mm bolts plus washers and nuts
1 Self Adhesive Rubber Strip

(Cages not included.)

Add to cart

CRANKTANK4 NEOPRENE COVER

$45.00

I don’t know about you, but one of my dislikes while out on the bike on a hot day is drinking water from a bottle that is the temperature of a cup of tea. While it’s not exactly a fridge, the CrankTank4 Neoprene Cover provides insulating properties to keep the water cool while adding some visual appeal.

The cover fits simply over the tank and fixes securely around the seat and down tubes using hook and loop fasteners. It takes just a few seconds to fit.

All the rage grey contour pattern with Adventure Hydration logo in the top corner.

AVAILABLE NOW

Specification:

  • 4 mm printed neoprene with hook and loop fasteners
  • Weight: 145 grams.
Add to cart

REPLACEMENT SILICONE BITE VALVE 3 PACK

$12.00

Pack of three Silicone Bite Valves for use with most hydration tubes. Suitable for tubes with outside diameter of around 9 mm to 10 mm. These bite valves simply slip onto the tube or tap fitting.

Includes

  • 3 x Silicone Bite Valves
Select options

PLAIN CAP for CRANKTANK4

$8.00

Plain cap without fittings for use in camp or if Frametank4 is just required for carrying water and not drinking on the bike.

Includes

  • 1 Plain Cap with O ring seal.
Select options

INSULATED HYDRATION TUBE WITH BITE VALVE 120 cm Length

$15.00 – $20.00

This is the 120 cm length Insulated Tube with Bite Valve as supplied in the Frametank4 kit. It can be supplied with the standard female quick disconnect fitting as used in the Frametank4, with a male quick disconnect fitting for use with Camelbak bladders or with no quick disconnect fitting.

Ideal as a longer replacement for using with a bladder in a frame bag.

Includes:

1 x 120 cm length Insulated Hydration Tube with Bite Valve and Camelbak style male quick disconnect fitting. (Left pic.)

OR

1 x 120 cm length Insulated Hydration Tube with Bite Valve. No Fittings (Middle pic.)

OR

1 x 120 cm length Insulated Hydration Tube with Bite Valve and CrankTank4 female quick disconnect fitting. (As supplied with CrankTank4 kit.) (Right pic.)

Select options

HYDRATION TUBE KEEPER

$8.00

A choice of tube keepers for hydration system drinking tubes fitted with an insulated cover (or taped to an appropriate diameter) as supplied in the CrankTank4 Kit.

New! Top Loading Tube Keeper now re-designed for greater holding power while maintaining ease of access.

Available soon! Side Loading Tube for even more tube security.

These keepers are designed to be fixed to round tubes (handlebar, top tube etc) in either of two orientations.

Ideal for if you’re using CrankTank4 on a second bike or even for use with a bladder in frame bag set-up.

Includes:

  • 1 3D Printed Tube Keeper
  • 1 piece Self Adhesive Rubber Strip
  • 2 Cable Ties
Select options

WEDGIE MOUNT

$15.00

The Wedgie fixes to the frame using the standard two boss bottle cage mount. It provides positive location for the CrankTank4 when extra clearance is required or frame profiles restrict.

It is designed for use on the seat tube when extra clearance is required for an electronic derailleur or for use on down tubes that utilise broad, squared off profiles as often seen with carbon or aluminium frames.

Includes:

  • 1 3D Printed Nylon Wedgie
  • 2 x 5mm Stainless Bolts
  • 2 x 5 mm Stainless Washers
Add to cart

SAWYER INLINE ADAPTOR KIT FOR MICRO SQUEEZE FILTER

$12.95

Turn your Sawyer Micro Squeeze water filter into an inline filtration system for your CrankTank4 (or hydration pack with 1/4″ inner diameter tube) with this set of easy-to-use adapters. (Sawyer Micro Squeeze filter sold separately).

Kit Includes

  • 1 male threaded barbed adaptor
  • 1 female threaded barbed adaptor
Add to cart

SAWYER MICRO SQUEEZE FILTRATION SYSTEM

$55.95

Enjoy clean and safe drinking water wherever you roam with the ultra-compact, lightweight, reusable Sawyer Micro Squeeze Water Filtration System.

With a total field weight of 56g, this tiny filter fits in the palm of your hand.  While small in size, the powerful Micro Squeeze removes 99.99999% of bacteria (salmonella, cholera and E. coli) and 99.9999% of protozoa (cryptosporidium and giardia) — exceeding EPA recommendations for removal rates.

 

 

Kit Includes:

  • 1x Micro Squeeze Filter with Push/Pull Cap
  • 1x 1 Litre Ultralight Collapsible Pouch
  • 1x Backwashing Plunger
  • 1x Cleaning Coupling (To connect the pouch or a 28mm threaded beverage bottle to filter outlet for backwashing.)
  • 1x Spare Gasket
  • 1x Drinking Straw (To attach to the filter inlet to drink directly from a water source.)
Details
Out Of Stock

SAWYER 3.78 LTR BLADDER

$37.95

The Sawyer 3.78 litre (1 US Gallon)Water Bladder is a lightweight robust solution to provide extra capacity and can also be coupled to the Sawyer Micro Squeeze Filter to form a gravity filtration system ideal for topping up your CrankTank4.

Ideal for bikepacking, touring, backcountry camping, and emergency preparedness, the reservoir features a wide mouth cap that allows for fast and easy filling and also a convenient carry handle.

Kit Includes:

1 – 3.78 litre (1 US Gallon) Water Bladder

Specs:

  • Wide Mouth for Fast Easy Filling
  • Compatible with the Sawyer MINI, Micro, and Squeeze Filters (not included)
  • 110 grams.
  • Convenient Transportation Handle
  • 3.78 L (1 US Gallon) Capacity